You have taken a long position in a call option on ibm

The mobile activation features in the Mobile and static activations topic of the Description section were revised. The Racks topic in the Description section was revised. MES planned availability date information was added to the Planned availability date section. The new Power E model MME features:. For ordering, contact your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at IBM-CALL Reference: The IBM Power E is a high-performance, secure, enterprise system optimized for the compute-intensive performance demands of large-scale, mission-critical transaction, database and analytics applications.

The Power E server delivers exceptional performance using enterprise POWER8 processors, each a Single Chip Module SCM with cores running over 4 GHz and executing up to eight threads per-core SMT8.

Each SCM has dual memory controllers to support up to 1 TB of memory and utilize up to GB off-chip eDRAM L4 off-chip cache. The two primary system building blocks are one system control unit and one or more system nodes. The system nodes are rack based. The new POWER8 processor single chip modules SCM are provided in each system node. Processors are interconnected by two sets of system buses. Each SCM contains two memory controllers per processor module.

Incrementing one core at a time is available through built-in capacity on demand CoD functions to the full capacity of the system. The Power E server can have up to two system nodes per system. With core nodes, the maximum is a core system. With core nodes, the maximum is an core system. The system control unit provides redundant system master clocks and redundant system master service processors FSPs.

Additionally, it contains the Op Panel, the System VPD, and a DVD. Each memory feature provides four CDIMMs. CDIMMs are custom DIMMs that enhance memory performance and memory reliability. Each system node has 32 CDIMM slots that support a maximum of eight memory features. Using GB CDIMM features yields a maximum of 2 TB per node. A two-node system has a maximum of eight memory features and 4 TB Capacity. Direct attached storage is supported with the EXP24S SFF Gen2-bay Draweran expansion drawer with twenty-four 2.

The day temporary elastic CoD processor and memory enablement features enable a system to temporarily activate all inactive processor and memory CoD resources for a maximum of 90 days before you must order another temporary elastic enablement feature number. With Power Enterprise Pools, IBM continues to enhance the ability to freely move processor and memory activations from one system to another system in the same pool, without the need for IBM involvement.

This capability now allows the movement of resources not only between like systems, but also between generations of Power Systems, and thus delivers unsurpassed flexibility for workload balancing and system maintenance. Power Enterprise Pools deliver the support to meet clients' business goals when it comes to the following:.

Power Enterprise Pools mobile activations are available for use on the Power, and systems and now on the Power E and E systems. Refer to the Hardware requirements section and Software requirements section for detailed requirements.

The Power E is designed to fit a standard inch rack. IBM Development has tested and certified the system in the IBM Enterprise rack T42, or The client can choose to place the server in other racks if they are confident those racks have the strength, rigidity, depth, and hole pattern characteristics that are needed.

The client should work with IBM Service to determine other racks' appropriateness. The Power E must be ordered with an IBM 42U enterprise rack T42 or An initial system order is placed in a T42 rack.

A same-serial-number model upgrade MES is placed in a feature rack. This is done to ease and speed client installation, provide a more complete and higher quality environment for IBM Manufacturing system assembly and testing, and provide a more complete shipping package. The T42 or feature is a 2-meter enterprise rack, providing 42U or 42 EIA of space.

Clients who don't want this rack can remove it from the order, and IBM Manufacturing will then remove the server from the rack after testing and ship the server in separate packages without a rack.

Use the chargeable factory-deracking code ER21 on the order to do this. Use feature 42U enterprise rack for this order. Three rack front door options are supported with Power E system nodes for the 42U enterprise rack T42 orthe acoustic doorthe attractive geometrically accented door ERG7 and the cost-effective plain front door The front trim kit is also supported The Power logo rack door is not supported. It is strongly recommended that the bottom 2U of the rack be left open for cable management when below-floor cabling is used.

Likewise, if overhead cabling is used, it is strongly recommended that the top 2U be left open for cable management. If clients are using both overhead and below-floor cabling, leaving 2U open on both the top and bottom of the rack is a good practice. Rack configurations placing equipment in these 2U locations can be more difficult to service if there are a lot of cables running by them in the rack. The system node and system control unit must be immediately physically adjacent to each other in a contiguous space.

The cables connecting the system control unit and the system node are built to very specific lengths. In a two-node configuration, system node 1 is on top, and then the system control unit in the middle and system node 2 is on the bottom. Use specify feature ER16 to reserve 5U space in the rack for a future system node and avoid the work of shifting equipment in the rack in the future.

With the 2 meter T42 or featurea rear rack extension of 8 inches or Probably around 64 short-length SAS cables per side of a rack or around 50 longer-length thicker SAS cables per side of a rack is a good rule of thumb. SAS cables are most commonly found with multiple EXP24S SAS drawers driven by multiple PCIe SAS adapters.

The feature ERG0 extension can be good to use even with a smaller numbers of cables as it enhances the ease of cable management with the extra space it provides. Multiple service personnel are required to manually remove or insert a system node drawer into a rack, given its dimensions and weight and content. To avoid any delay in service, it is very strongly recommended that the client obtain an optional lift tool EB2Z. The EB2Z lift tool provides a hand crank to lift and position up to kg lb.

The EB2Z lift tool is 1. Note that a single system node can weigh up to PowerVM Enterprise virtualization is built into the Power E system and provides the complete set of PowerVM virtualization functionality needed for Power enterprise servers with POWER8 technology. This enables efficient resource sharing through virtualization, which allows workload consolidation and secure workload isolation as well as the flexibility to redeploy resources dynamically.

Alternative configuration options are available on a special bid basis from your IBM representative or Business Partner. This can allow a partition to do significantly more work or support more users with the same physical amount of memory. Similarly, it can allow a server to run more partitions and do more work for the same physical amount of memory. The trade-off of memory capacity for processor cycles can be an excellent choice, but the degree of expansion varies on how compressible the memory content is.

Tests in IBM laboratories using sample workloads showed excellent results for many workloads in terms of memory expansion per additional CPU utilized.

Other test workloads had more modest results. The POWER8 accelerator includes some minor enhancements and also leverages POWER8 higher bandwidth and lower latency characteristics. You have a great deal of control over Active Memory Expansion usage. Each individual AIX partition can turn on or turn off Active Memory Expansion. Control parameters set the amount of expansion desired in each partition to help control the amount of CPU used by the Active Memory Expansion function.

An IPL is required for the specific partition that is turning memory expansion. Once turned on, monitoring capabilities are available in standard AIX performance tools such as lparstat, vmstat, topas, and svmon. A planning tool is included with AIX, allowing you to sample actual workloads and estimate both how expandable the partition's memory is and how much CPU resource is needed. Any Power Systems model can run the planning tool. In addition, a one-time, day trial of Active Memory Expansion is available to enable more exact memory expansion and CPU measurements.

You can request the trial using the Capacity on Demand web page. Active Memory Expansion is enabled by chargeable hardware feature EM82, which can be ordered with the initial order of the system node or as an MES order. A software key is provided when the enablement feature is ordered, which is applied to the system node. An IPL is not required to enable the system node. The key is specific to an individual system node and is permanent.

It cannot be moved to a different server. The additional CPU resource used to expand memory is part of the CPU resource assigned to the AIX partition running Active Memory Expansion.

Normal licensing requirements apply. For clients loading the IBM i operating system, the four-digit numeric QPRCFEAT value used on the MME or MHE is the same as the four-digit numeric feature number for the processors used in the system. For example, if the processor feature number in a system is EPBA, the QPRCFEAT value for the system would be EPBA.

The Power System Capacity Backup CBU designation can help meet your requirements for a second system to use for backup, high availability, and disaster recovery. It enables you to temporarily transfer IBM i processor license entitlements and Enterprise Enablement entitlements purchased for a primary machine to a secondary CBU-designated system. Temporarily transferring these resources instead of purchasing them for your secondary system may result in significant savings.

Processor activations cannot be transferred as part of this CBU offering, but programs such as Power Enterprise Pools are available for the function. The CBU specify feature number is available only as part of a new server purchase or during an MES upgrade from an existing system to a MME.

Certain system prerequisites must be met, and system registration and approval are required before the CBU specify feature can be applied on a new server.

A used system that has an existing CBU feature cannot be registered. The only way to attain a CBU feature that can be registered is with a plant order. Standard IBM i terms and conditions do not allow either IBM i processor license entitlements or OLTP Enterprise Enablement entitlements to be transferred permanently or temporarily. These entitlements remain with the machine they were ordered for. When you register the association between your primary and on-order CBU system, you must agree to certain terms and conditions regarding the temporary transfer.

After a CBU system designation is approved and the system is installed, you can temporarily move your optional IBM i processor license entitlement and Enterprise Enablement entitlements from the primary system to the CBU system when the primary system is down or while the primary system processor cores are inactive. The CBU system can then better support fail-over and role swapping for a full range of test, disaster recovery, and high availability scenarios.

Temporary entitlement transfer means that the entitlement is a property transferred from the primary system to the CBU system and may remain in use on the CBU system as long as the registered primary and CBU system are in deployment for the high availability or disaster recovery operation.

These systems have IBM i software licenses with an IBM i P30 software tier, or higher. The primary machine must be in the same enterprise as the CBU system. Before you can temporarily transfer IBM i processor license entitlements from the registered primary system, you must have more than one IBM i processor license on the primary machine and at least one IBM i processor license on the CBU server.

An activated processor must be available on the CBU server to use the transferred entitlement. You may then transfer any IBM i processor entitlements above the minimum one, assuming the total IBM i workload on the primary system does not require the IBM i entitlement you would like to transfer during the time of the transfer. During this temporary transfer, the CBU system's internal records of its total number of IBM i processor license entitlements are not updated, and you may see IBM i license noncompliance warning messages from the CBU system.

Such messages that arise in this situation do not mean you are not in compliance. Before you can temporarily transfer entitlements, you must have more than one Enterprise Enablement entitlement on the primary server and at least one Enterprise Enablement entitlement on the CBU system.

You may then transfer the entitlements that are not required on the primary server during the time of transfer and that are above the minimum of one entitlement. Note that if you are using software replication versus PowerHAyou may well need more than a minimum of one entitlement on the CBU to support the replication workload. For example, if you have an core Power as your primary system with four IBM i processor license entitlements three above the minimum and two Enterprise Enablement entitlements one above the minimumyou can temporarily transfer up to three IBM i entitlements and one Enterprise Enablement entitlement.

During the temporary transfer, the CBU system's internal records of its total number of IBM i processor entitlements is not updated, and you may see IBM i license noncompliance warning messages from the CBU system.

If your primary or CBU machine is sold or discontinued from use, any temporary entitlement transfers must be returned to the machine on which they were originally acquired. Power Enterprise Pools provide a level of flexibility and value for systems that operate together as a pool of resources. Power Enterprise Pools mobile activations are available for use on the Power, and systems and now on the new Power E and E systems.

They can be assigned to any system in a predefined pool by the user with simple HMC commands. IBM does not need to be notified when these resources are reassigned within a pool. The simplicity of operations offers new flexibility when managing large workloads in a pool of systems. This capability is especially appealing to aid in providing continuous application availability during maintenance windows.

Not only can workloads easily move to alternate systems, but now the activations can move as well. Now with the availability of the new Power E and E systems, IBM continues to enhance the ability to freely move processor and memory activations from one system to another system in the same pool, without the need for IBM involvement.

This capability now allows the movement of resources not only between like systems but also between generations of Power Systems, and thus delivering unsurpassed flexibility for workload balancing and system maintenance.

Now, more than ever, Power Enterprise Pools delivers the support to meet client's business goals when it comes to the following:. Two types of pools are available. One that enables Power MMD or Power E MME class systems to run in the same pool and the other that enables Power MHDPower FHBand Power E MHE class systems to run in the same pool. Both pools allow both processor and memory activations to move between servers within the pool.

Systems with different clock speeds are supported, co-existing within the same pool. All systems in the pool must be attached to the same HMC. Power Systems users now have the satisfaction of knowing that as their requirements change, so can their systems. A simple movement of activations from one system to another helps users rebalance resources and respond to business needs.

Maintenance windows now open up more easily as both workloads and activations move transparently across systems. Even disaster recovery planning becomes more manageable with the ability to move activations where and when they are needed.

Power Enterprise Pools are just one more reason why enterprise class servers from Power Systems deliver value for your ever-changing business. A more flexible activation type is employed for Power Enterprise Pools. Historically, only "static" activations that could not move from server to server were available.

These static activations remain available on the Power, andand are announced on the E and E and a certain number are required per server. But mobile activation features can be moved in the Power Enterprise Pool. Mobile activations apply to both processor core activations and memory activations. A base number of static cores must continue to be activated on each system in the pool, consistent with previous minimum configurations.

The new Power E and E must have at least eight cores activated in static capability. The Power and Power continue to have the requirement of at least four cores activated in static capability.

All remaining processor core activations on these systems can optionally be mobile activations, be static activations, or be a mixture. Static and mobile core activations can co-reside in the same system and in the same partition. Static and mobile memory activations can co-reside in the same system and in the same partition. Mobile activation feature codes are GB increments. Existing static activation features can be converted to mobile activations for memory and cores.

To provide administrative and pricing advantages, there are "regular" static core activations and "mobile-enabled" static core activations. The price of a mobile-enabled core activation is higher than a regular static activation. However, the total price of a static core activation plus a conversion to a mobile activation is higher than the total price of a mobile-enabled static core activation plus a conversion to a mobile core activation.

The Power Enterprise Pools mobile activation feature codes continue to exist for the Power, and servers and can co-exist in the same pool as the new Power E and E feature codes.

The Power, and mobile activations feature codes are as follows:. Each Power Enterprise Pool is managed by a single master HMC. The HMC that was used to create a Power Enterprise Pool is set as the master HMC of that pool. After a Power Enterprise Pool is created, a redundant HMC can be configured as a backup.

All Power Enterprise Pool resource assignments must be performed by the master HMC. When powering on or restarting a server, ensure that the server is connected to the master HMC. This ensures that the required Mobile CoD resources are assigned to the server.

Business Technology News and Commentary - InformationWeek

The maximum number of systems in a Power Enterprise Pool is 32 high-end or 48 mid-range systems. An HMC can manage multiple Power Enterprise Pools but is limited to total partitions. The HMC can also manage systems that are not part of the Power Enterprise Pool. Powering down an HMC does not limit the assigned resources of participating systems in a pool but does limit the ability to perform pool change operations.

After a Power Enterprise Pool is created, the HMC can be used to perform the following functions:. To qualify for use of the Power Enterprise Pool offering, a participating system must be one of the following:. Each system must have installed Machine Code release level 7. Processor and memory activations that are enabled for movement within the pool will be in addition to these base minimum configurations.

Ordering and enabling mobile activations for enterprise class systems is accomplished by following these steps:. Download the client-specific configuration file with mobile activations to the controlling HMC for the pool.

The file will work only for the specified system serial numbers. A new file will be generated when systems or mobile resources are added or removed from the pool. Adding or removing a system from an established Power Enterprise Pool requires notification to IBM. An updated addendum must be submitted to the Power Systems CoD Project Office pcod us.

When the update is processed, a new pool configuration file will be posted on the CoD website and must be downloaded to the controlling HMC. Before removal from a pool, all assets including mobile resources that were originally purchased with the system must be returned to that same system serial number. Mobile assets belonging to a system may qualify for transfer to another system serial number, depending on specific qualifying guidelines, and will require additional administrative action.

Systems removed from a pool can join another pool and contribute mobile activation resources to the new pool or use another system's mobile activation resources. Mobile activations require a pool ID to be recognized. Several types of capacity on demand CoD processors are optionally available for the Power E system node.

They help meet changing resource requirements in an on demand environment by using resources installed on the system but not activated.

Capacity upgrade on demand CUOD enables you to purchase additional permanent processor or memory capacity and dynamically activate it when needed.

Elastic capacity on demand elastic CoD enables processors or memory to be temporarily activated in full-day increments as needed. Charges are based on usage reporting collected monthly. Processors and memory can be activated and turned off an unlimited number of times, whenever you want additional processing resources. With this offering, system administrators have an interface at the HMC to manage the activation and deactivation of resources. A monitor that resides on the server logs the usage activity.

You must send this usage data to IBM monthly. A bill is then generated based on the total amount of processor and memory resources utilized, in increments of processor and memory 1 GB days. Before using temporary capacity on your server, you must enable your server.

To do this, order an enablement feature MES only and sign the required contracts. If a Power E system node uses the IBM i operating system and the temporarily activated cores were used for IBM i partitions, you must inform the sales team placing the billing feature order which operating system caused the temporary elastic CoD processor use so that the correct feature can be used for billing.

Use the following features to order enablement features and support billing charges on the Power E Before requesting temporary capacity on a server, you must "enable" it for elastic CoD. To do this, order a no-charge enablement feature MES only and sign the required contracts. IBM will generate an enablement code, mail it to you, and post it on the web for earn money from online surveys without investment to retrieve and enter on your server.

A processor enablement code lets you request up to 90 processor days of temporary unused CoD processor capacity for all your processor cores that have not been permanently activated. For example, if you have 20 processor cores that are not permanently activated, the processor enablement code allows up to 1, processor days 20 x If you have reached or are about to reach the limit of 90 processor days per unactivated processor core, place an order for another processor enablement code to reset the number of days you can request.

Similarly, a memory enablement code lets you request up to 90 days of temporary unused CoD memory capacity for all your gigabytes of memory that have not been permanently activated.

For example, if you had GB of memory that was not permanently activated, the memory enablement code allows up to GB memory days x If you have reached the limit of 90 memory days per unactivated memory, place an order for another memory enablement code to reset the number of days you can request.

Before ordering a new enablement code for either memory or processor temporary CoD, you must first process an MES delete order, deleting the current enablement code installed in the server configuration file. The sales channel IBM Business Partner must sign one of the following contracts, if applicable:.

When Elastic CoD temporary capacity is needed, simply use the HMC menu for elastic CoD and specify how many of the inactive processors or how many gigabytes of memory you would like temporarily activated for some number of days. You will be billed for the days requested, whether the capacity is assigned to partitions or left in the shared processor pool. At the end of the temporary period days you requestedyou must ensure the temporarily activated capacity is available to be reclaimed by the server not assigned to partitions or you will be billed for any processor days not returned per the contract you signed.

When you need temporary capacity, use the Elastic CoD temporary capacity HMC menu for the server and specify how many of the inactive processors or how many gigabytes of memory you would like temporarily activated for some number of days.

The user must assign the temporary capacity to a partition whether or not the machine is configured for LPAR to begin using temporary capacity. The contract, signed by the client before receiving the enablement feature, requires the elastic CoD user to report billing data at least once a month whether there is activity or not.

This data is used to determine the proper amount to bill at the end of each billing period calendar quarter. Failure to report billing data for use of temporary processor or memory capacity during a billing quarter will result in default billing equivalent to 90 processor days of temporary capacity. The sales channel will be notified of client requests for temporary capacity. As a result, the sales channel must order a quantity of billing features using the appropriate billing features EPJ6, EPJ7, EPJ8, EPJ9, EPJJ, EPJK, EPJL, or EPJM for each billable processor and memory day reported less any outstanding credit balance of processor and memory days.

The client must report billing data requested karachi stock exchange hbl share rate unreturned processor and memory days at a minimum of once per month either electronically or by fax stated requirement in the signed contract.

At the end of each billing period calendar quarterIBM will process the accumulated data reported and notify the sales channel for proper billing. The sales channel places an order for the appropriate quantity of billing features one processor billing feature ordered for each processor day used, or one memory day for each memory day utilized. IBM will ship a billing notice notifies client of billing actions to the ship-to address on the order as part of the fulfillment process.

The client pays the sales channel and the sales channel pays IBM for the fulfillment of the billing features. Utility CoD provides additional processor performance on a temporary basis within the shared processor pool. Utility CoD enables you to 1 best binary options platform in north america broker a quantity of inactive processors into the system node's shared processor pool, which then becomes available to the pool's resource manager.

If additional workload requires a higher level of performance, the system will automatically enable the additional Utility CoD processors to be used. The system continuously monitors and charges for the performance needed above the base permanent level.

Registration and usage reporting for Utility CoD is made using a public website and payment is based on reported usage. Utility CoD requires PowerVM Enterprise Edition to be active on the MME. If a Power E system node uses the IBM i operating system and the temporarily activated cores were used for IBM i partitions, the client must inform the sales team placing the billing feature order which operating system caused the temporary Utility CoD processor use so that the correct feature can be used for billing.

For software licensing considerations with the various CoD offerings, refer to the latest revision of the Capacity on Demand Planning Guide at. A US Section Voluntary Product Accessibility Template VPAT containing details on accessibility compliance can be requested at. IBM Power E is capable as of October 31,when used in accordance with associated IBM documentation, of satisfying the applicable requirements of Section of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it.

A US Section Voluntary Product Accessibility Template VPAT can be requested at. The reliability of systems starts with components, devices, and subsystems that are designed to be highly reliable. During the design and development process, subsystems go through rigorous verification and integration testing processes.

During system manufacturing, systems go through a thorough testing process to help ensure the highest level of product quality. Considerable redundancy in the infrastructure of these systems is included so to avoid failing components leading to system outages.

Such components include power supplies, fans, processor and memory voltage regulation outputs, global service processors, and processor clocks. The Power Systems family continues to offer and introduce significant enhancements designed indian stock market watch apk increase system availability.

This significantly reduces exposure to both hard logic and soft transient errors in the processor core. Soft failures in the processor core are transient intermittent errors, often due to cosmic rays or other sources of radiation, and generally are not repeatable.

When such an error is encountered in the core, the POWER8 processor will first automatically retry the instruction. If the source of the error was truly transient, the instruction will succeed and the system will continue as before. Hard failures are more difficult, being true logical errors that will be replicated each time the instruction is repeated. Retrying the instruction will not help in this situation.

These features are designed to avoid a full system outage. This significantly reduces the probability of any one processor affecting total system availability.

Also available is the ability to assign availability priorities etrade vs scottrade penny stocks partitions. In the PowerVM environment if an alternate processor recovery event requires spare processor resources in order to protect a workload, when no other means of obtaining the spare resources is available, the system will determine which partition has the lowest priority and attempt to claim the needed resource.

On a properly configured POWER8 processor-based server, this allows that capacity to be first obtained from, for example, a test partition instead of a financial accounting system.

The L2 and L3 caches in the POWER8 processor and L4 cache in the memory buffer chip are protected with double-bit detect, single-bit correct error detection code ECC. In addition, a threshold of correctable errors detected on cache lines can result in the data in the cache lines being purged and the cache lines removed from further operation without requiring a reboot in the PowerVM environment.

In addition, the L2 and L3 caches have the ability to dynamically substitute a spare bit-line for a faulty bit-lane, allowing an entire faulty "column" of cache, impacting multiple cache lines, to be repaired. An ECC early retirement investment options error detected in these caches can also trigger a purge and delete of cache lines.

This results in no loss of operation if the cache lines contained data unmodified from what was stored in system memory. Modified data would be handled through Special Uncorrectable Error handling. L1 data and instruction caches also have a retry capability for intermittent errors and a cache set delete mechanism for handling solid failures.

Special Uncorrectable Error SUE handling is various sectors in indian stock market to prevent an uncorrectable error in memory or cache from immediately causing the system to terminate. Rather, the system tags the data and determines whether it will ever be used again. If the error is irrelevant, it will not force a check stop.

The memory has error detection and correction circuitry designed such that the failure of any one specific memory module within an ECC word by itself can be corrected absent any other fault. In addition, a spare DRAM per rank on each memory port provides for dynamic DRAM device replacement during runtime operation. Also, dynamic lane sparing on the DMI link allows for repair of a faulty data lane.

Other memory protection features include retry capabilities for certain faults detected supply and demand forex youtube both the memory controller and the memory buffer. Memory is also periodically scrubbed to allow for soft errors to be corrected and for solid single-cell errors reported to the hypervisor, which supports operating system deallocation of a page associated with a hard single-cell fault.

The POWER8 memory subsystem is capable of mirroring sections of memory by writing to two different memory locations, and when an error is detected when reading from one location, taking data from the alternate location. This is used by the POWER hypervisor in these systems to easy way to make money in farmville 2 critical memory within the hypervisor so that a fault, even a solid uncorrectable error in the data, can be tolerated using the mirrored memory.

When correctable solid faults occur in components of the processor and memory subsystem, the system will attempt to correct the problem by using spare capacity in the failing component, using a spare column in an L2 or L3 cache, for example, a spare data line in a memory or processor bus, or a spare DRAM in memory.

Use of such spare capacity restores the system to full functionality without the need to take a repair action.

When such spare capacity is not available, the service processor and Benelli supernova tactical collapsible stocks hypervisor may request deallocation of the component experiencing the fault. When there are sufficient resources to continue running partitions at requested capacity, the system will continue to do so.

This includes taking advantage of unlicensed capacity update on demand processor and memory resources as well as licensed but unallocated resources. When such unlicensed or unused capacity is used in this manner, a request best way to earn poe in puzzle pirates service will be made.

PCI extended error handling EEH -enabled adapters respond to a special data packet generated from the affected PCI slot hardware by calling system firmware, which will examine the affected bus, allow the device driver to reset it, and continue without a system reboot. For Linux, EEH support extends to bond trading stock market beginners majority of frequently used devices, although some third-party PCI devices may not provide native EEH support.

The service processor monitors the operation of the firmware during the boot process and also monitors the hypervisor for termination. The hypervisor monitors the service processor and reports the service reference code when it detects surveillance loss.

When the auto-restart option is enabled, the system can automatically restart following an unrecoverable software error, hardware failure, or environmentally download indikator forex paling akurat ac power failure.

The purpose of serviceability is to efficiently repair the system while attempting to minimize or eliminate impact to system operation. Depending upon the system and warranty contract, service may be performed by the customer, an IBM representative, or an authorized warranty service provider. The serviceability features delivered in this system provide a highly efficient service environment by incorporating the following attributes:.

The HMC is a dedicated server that provides functions for configuring and managing servers for either partitioned or full-system partition using a GUI or command-line interface CLI. An HMC in the binary options it is impossible to make money to the system allows support personnel with client authorization to remotely log in to review error logs and perform remote maintenance if required.

Online diagnostics, when installed, are resident with the AIX operating system on the disk or system. They can be booted in single-user mode service moderun in maintenance mode, or run concurrently concurrent mode with other applications.

They have access to the AIX error log and the AIX configuration data. Because the MME and MHE systems have an optional DVD-RAM, alternative methods for maintaining and servicing the system need to be available a fake cashiers check the DVD-RAM is when do futures trade hours ordered.

An external Internet connection must be available to maintain or update system firmware to the latest required level. These procedures are available through IBM Knowledge Center. The service interface allows support personnel to communicate with the stock trading workbook support applications in a server using a console, an interface, or a terminal.

Delivering a clear, concise view of available service applications, the service interface allows the support team to manage system resources and service information in an efficient and effective way. Applications available through the service interface are carefully configured and placed to give service providers access to important service functions.

Different service interfaces are used, depending on the state of the system, hypervisor, and operating automated forex trader. The primary service interfaces are:.

In the Guiding Light service indicator implementation, when a fault condition is surveys to earn money legit on the POWER8 processor-based server, a blue Enclosure Fault LED will illuminate on the enclosure containing the failing part. The Guiding Light system pinpoints the exact part by blinking the amber FRU identify LED associated with the part to be replaced when selected by the servicer as part of the repair procedure.

This action will roll up to the blue enclosure locate LED and down to the individual component to be serviced. First Failure Data Capture FFDC is a technique that helps ensure that when a fault is detected in a system, the root cause of the fault will be captured without the need to re-create the problem or run any sort of extending tracing or diagnostics program. For the vast majority of faults, a good FFDC design means that the root cause can also be detected automatically without servicer intervention.

FFDC information, error data analysis, and fault isolation are necessary to implement the advanced serviceability techniques that enable efficient service of the systems and to help determine the failing items. In the rare absence of FFDC and Error Data Analysis, diagnostics are required to re-create the failure and determine the failing items. General diagnostic objectives are to detect and identify problems so they can be resolved quickly. Elements of IBM's diagnostics strategy include:.

Because of the FFDC technology designed into IBM servers, it is not necessary to perform re-create diagnostics for failures or require user intervention. Solid and intermittent errors are designed to be correctly detected and isolated at giau tu forex time the failure occurs.

Runtime and boot-time diagnostics fall into this category. As the name implies, stand-alone or user-initiated diagnostics requires user intervention. The user must perform manual steps, including:. It is expected that the majority of the components that will fail, will be able to be replaced using concurrent maintenance. These include power supplies, power cable, fans, op panel, real-time clock battery, and PCIe adapters. The system also supports updating firmware with service packages, typically concurrently.

The determination of whether a firmware release can be updated concurrently is identified in the readme information file that is released with the firmware. Service providers use these labels to assist them in performing maintenance actions. Service labels are found in various formats and positions and are intended to transmit readily available information to the servicer during the repair process. Following are some of these service labels and their purpose:. Location diagrams may include location codes, drawings of physical locations, concurrent maintenance status, or other data pertinent to a repair.

Location diagrams are especially useful when multiple components such as DIMMs, CPUs, processor books, fans, adapter cards, LEDs, and power supplies are installed. The following service enhancements are included in the physical packaging of the systems to facilitate service:. In the unlikely event of system hardware or environmentally induced failure, the system runtime error capture capability systematically analyzes the hardware error how do i buy stuff on ebay without paypal to determine the cause of failure.

The analysis result will be stored in system NVRAM. When the system can you have taken a long position in a call option on ibm successfully restarted either manually or automatically, or if the system continues to operate, the error will be reported to the operating system. Hardware and software failures are recorded in the system log. An Error Log Analysis ELA routine analyzes the error, forwards the event to the Service Focal Point SFP application running on the HMC, and notifies the system administrator that it has isolated a likely cause of the system problem.

The Service Processor event log also records unrecoverable checkstop conditions, forwards them to the SFP application, and notifies the system administrator. When the information is logged in the SFP application, if the system is properly configured, a call home service request will be initiated and the pertinent failure data with service parts information and part locations will be sent to an IBM service organization. Customer contact information and specific system-related data such as the machine type, model, and serial number, along with the error log data related to the failure, are sent to IBM Service.

With Live Partition Mobility, users can migrate an AIX, Linux, or IBM i partition running on one POWER partition system to another POWER system without disrupting services. The migration transfers the entire system environment, including processor state, memory, attached funny stock market poems devices, and connected users.

It provides continuous operating system and application availability during planned partition outages for repair of hardware and firmware faults. When initially purchasing a system, the client needs to consider the effect on the workloads that servicing the system will make.

It is expected that most of the system FRUs that fail will be replaced while the system is still powered on, using Concurrent Maintenance. For the remainder of the FRUs, the entire system must be powered off to service the FRU.

For customers with critical workloads, which cannot afford to be stopped, the use of Live Partition Mobility needs to be planned for when the initial purchase of the system is made. The service processor provides the capability to diagnose, check the status of, and sense the operational conditions of a system.

It runs on its own power boundary and does not require resources from a system processor to be operational to perform its tasks. Under PowerVM the service processor supports surveillance of the connection to the HMC and to the system firmware hypervisor. It also provides several remote power control options, environmental monitoring, reset, restart, remote maintenance, and diagnostic functions, including console mirroring.

The service processors menus ASMI can be accessed concurrently with system operation, allowing nondisruptive abilities to change system default parameters. Call home refers to an automatic or manual call from a customer location to the IBM support structure with error log data, server status, or other service-related define stock market trading. Call home invokes the service organization in order for the appropriate service action to begin.

Call home can be done through the HMC. While configuring call home is optional, clients are encouraged to implement this feature in order to obtain service enhancements such as reduced problem determination and faster and potentially more accurate transmittal of error information. In general, using the call home feature can result in increased system availability. Refer to the next section for specific details on this application.

Electronic Service Agent and the IBM Electronic Services web portal comprise the IBM Electronic Services solution, which is dedicated to providing fast, exceptional support to IBM customers.

IBM Electronic Service Agent is a no-charge tool that proactively monitors and reports hardware events such as system errors, performance issues, and inventory. Electronic Service Agent can help focus on the customer's company business initiatives, save time, and spend less effort autocorrelation test stock market return day-to-day IT maintenance issues.

System configuration and inventory information collected by Electronic Service Agent also can be viewed on the secure Electronic Services web portal and used to improve problem determination and resolution between the customer and the IBM support team. As part of an increased focus to provide even better service to IBM customers, Electronic Service Agent tool configuration and activation comes standard with the system.

In support of this effort, a new HMC External Connectivity security whitepaper has been published, which describes data exchanges between the HMC and profitable forex scalping strategy IBM Service Delivery Center SDC and the methods and protocols for this exchange.

To read the whitepaper and prepare for Electronic Service Agent installation, go to the "Security" section at. Electronic Service Agent is designed to enhance the warranty and maintenance service by providing faster hardware error reporting and uploading system information to IBM Support.

This can optimize the time monitoring the symptoms, diagnosing the error, and manually calling IBM Support to open a problem record. And 24x7 monitoring and reporting means no more dependency on human intervention or off-hours customer personnel when errors are encountered in the middle of the night. The Electronic Service Agent tool is designed to be secure in monitoring, reporting, and storing the data at IBM.

The Electronic Service Agent tool is designed to securely transmit either through the Internet HTTPS or VPN or modem to provide customers a single binary option trading india of exit from their site.

Communication is one way. Activating Electronic Service Agent does not enable IBM to call into a customer's system. Because system information and you have taken a long position in a call option on ibm logs are automatically uploaded to the IBM Support Center in conjunction with the service request, customers are not required to find and send system information, decreasing the risk of misreported or misdiagnosed errors. Once inside IBM, problem error data is run through a data knowledge management system and knowledge articles are appended to the problem record.

Using the IBM ID entered during activation, customers can view system and support information in the "My Systems" and "Premium Search" sections of the Electronic Services website. The Electronic Services web portal is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support.

This web portal enables you to gain easier access to IBM resources for assistance in resolving technical problems. The newly improved My Systems and Premium Search functions make it even easier for Electronic Service Agent-enabled customers to track system inventory and find pertinent fixes. My Systems provides valuable reports of installed hardware and software using information collected from the systems by IBM Electronic Service Agent.

Reports are available for any system associated with the customer's IBM ID. Premium Search combines the function of search and the value of Electronic Service Agent information, providing advanced search of the technical support knowledgebase.

Using Premium Search and the Service Agent information that has been collected from the system, customers are able to see search results that apply specifically to their systems. For more information on how to utilize the power of IBM Electronic Services, visit the following website or contact an IBM Systems Services Representative. Included with Power E system is a PowerCare services option, which entitles you to choose one of several high-value technical service offerings from IBM to complement and assist in the deployment of a new Power E system.

This option is provided at no additional charge and requires no additional approvals. By leveraging the skills, experiences, and proven methodology of IBM Systems Lab Services professionals, you can potentially increase the efficiency and quality of your complex data center operations. The PowerCare option is included with new Power E systems and MES upgrades into a Power E The customer has up to 90 days from the installation date of the Power E to select a PowerCare offering.

Delivery of the selected service must be completed within nine months of the installation date of the Power E system. IBM's statements regarding its plans, directions, and intent are subject to change or withdrawal without notice at IBM's sole discretion.

Information regarding potential future products is intended to outline our general product direction and it should not be relied on in making a purchasing decision.

Videotelephony - Wikipedia

The information mentioned regarding potential future products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. Information about potential future products may not be incorporated into any contract.

The development, release, and timing of any future features or functionality described for our products remains at our sole discretion. Refer to Hardware Announcementdated October 06,for IBM Power System E Server. The following are newly announced features on the specific models of the IBM Power Systems machine type:. The existing components being replaced during a model or feature conversion become the property of IBM and must be returned. Feature conversions are always implemented on a "quantity of one for quantity of one" basis.

Multiple existing features may not be converted to a single new feature. Single existing features may not be converted to multiple new features.

If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. Hardware documentation such as installation instructions, user's information, and service information is available to download or view at. The IBM Systems Information Center provides you with a single information center where you can access product documentation for IBM systems hardware, operating systems, and server software.

Through a consistent framework, you can efficiently find information and personalize your access. Visit the IBM Systems Information Center, at. IBM services include business consulting, outsourcing, hosting services, applications, and other technology management. These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an on-demand business.

They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs. For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit.

To help assure installability and serviceability in non-IBM, industry-standard racks, review the vendor's installation planning information for any product-specific installation requirements. The Power E must be installed in a rack with a rear door and side panels for EMC compliance.

The native HMC Ethernet ports must use shielded Ethernet cables. Government regulations such as those prescribed by OSHA or European Community Directives may govern noise level exposure in the workplace and may apply to you and your server installation. This IBM system is available with an optional acoustical door feature that can help reduce the noise emitted from this system. The actual sound pressure levels in your installation depend upon a variety of factors, including the number of racks in the installation; the size, materials, and configuration of the room where you designate the racks to be installed; the noise levels from other equipment; the room ambient temperature, and employees' location in relation to the equipment.

Further, compliance with such government regulations also depends upon a variety of additional factors, including the duration of employees' exposure and whether employees wear hearing protection. IBM recommends that you consult with qualified experts in this field to determine whether you are in compliance with the applicable regulations. This equipment is subject to FCC rules and shall comply with the appropriate FCC rules before final delivery to the buyer or centers of distribution.

The Power E system nodes or system control unit or PCIe Gen3 Expansion units are not certified for connection to interfaces of public telecommunications networks. Certification may be required by law prior to making any such connection. Contact an IBM representative or reseller for any questions and for information on PCIe adapters that can be used in the system and which are certified. The product is in compliance with IBM Corporate Bulletin C-B Statement of Conformity of IBM Product to External Standard Suppliers Declaration.

The Power E system nodes or system control unit or PCIe Gen3 Expansion units are not certified for direct connection to interfaces of public telecommunications networks. Contact an IBM representative or reseller for any questions and for information on PCIe adapters which can be used in the system and which are certified. The MME main components are the system node and the system control unit.

The system node is 5 EIA units and the system control unit is 2 EIA units. When either AIX or Linux are the primary operating systems, the order must include a minimum of the following items:.

When IBM i is the primary operating system, the order must include a minimum of the following items:. The MME integration in a 2.

A single T42 rack can be ordered containing one or two Power E systems. Note care must be taken anytime ordering a pair of Power servers in a rack to ensure there is space for horizontal PDUs, future system node additions and anything else the rack needs to contain.

A customer can order one factory-integrated system node and later order a second system node to be installed in the same rack at the client establishment. If a MES same-serial-number upgrade, feature feature 1 must be ordered. Only horizontal PDUs are used by IBM Manufacturing in racks hosting the MME system nodes. Each PDU will occupy a separate 1 EIA to aid cable routing. If attaching an HMC to a new server or adding function to an existing server that requires a firmware update, the HMC machine code may need to be updated.

To determine the HMC machine code level required for the firmware level on any server, go to the following website to access the Fix Level Recommendation Tool FLRT on or after the planned availability date for this product. FLRT will identify the correct HMC machine code for the selected system firmware level. If a single HMC is attached to multiple servers, the HMC machine code level must be updated to the server with the most recent firmware level.

All prior levels of server firmware are supported with the latest HMC machine code level. An HMC is required to manage POWER8 processor-based system nodes implementing partitioning. Multiple POWER8 processor-based system nodes can be supported by a single HMC. If an HMC is used to manage any POWER8 processor-based system node, the HMC must be -- CR5 through CR8 rack models -- or CR8 deskside model, or later.

When PowerVC is enabled, 4 GB of RAM is recommended. HMC CR5 ships with a default of 2 GB RAM. Visit the IBM Prerequisite website for compatibility information for hardware features and the corresponding AIX and IBM i Technology Levels. For best exploitation of the outstanding performance capabilities and most recent improvements of POWER8 technology, IBM recommends upgrading Java-based applications to Java 7 or Java 6, whenever possible.

For those clients who want to run Java in AIX environments, refer to. For those clients who want to run Java in IBM i environments, read the following planning statements:.

Clients are strongly encouraged to move to a more current supported version: Java 6, Java 7, or Java 7. This product uses the security and auditability features of host software and application software. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities. Electronic Service Agent and the IBM Electronic Support web portal are dedicated to providing fast, exceptional support to IBM Systems customers.

The IBM Electronic Service Agent tool is a no-additional-charge tool that proactively monitors and reports hardware events, such as system errors, performance issues, and inventory. The Electronic Service Agent tool can help you stay focused on your company's strategic business initiatives, save time, and spend less effort managing day-to-day IT maintenance issues. Servers enabled with this tool can be monitored remotely around the clock by IBM Support all at no additional cost to you.

Now integrated into the base operating system of AIX 5. System configuration and inventory information collected by the Electronic Service Agent tool also can be viewed on the secure Electronic Support web portal, and used to improve problem determination and resolution by you and the IBM support team.

For more information and documentation on how to configure and use Electronic Service Agent, refer to. The IBM Electronic Support portal is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support.

This portal enables you to gain easier access to IBM resources for assistance in resolving technical problems. The My Systems and Premium Search functions make it even easier for Electronic Service Agent tool-enabled customers to track system inventory and find pertinent fixes. The Electronic Service Agent tool is designed to enhance the Warranty or Maintenance Agreement by providing faster hardware error reporting and uploading system information to IBM Support. This can translate to less wasted time monitoring the "symptoms," diagnosing the error, and manually calling IBM Support to open a problem record.

Its 24 x 7 monitoring and reporting mean no more dependence on human intervention or off-hours customer personnel when errors are encountered in the middle of the night. The Electronic Service Agent tool securely transmits either via the Internet HTTPS or VPN or modem, and can be configured to communicate securely through gateways to provide customers a single point of exit from their site.

System inventory information is stored in a secure database, which is protected behind IBM firewalls. It is viewable only by the customer and IBM. The customer's business applications or business data is never transmitted to IBM. Since system information and error logs are automatically uploaded to the IBM Support center in conjunction with the service request, customers are not required to find and send system information, decreasing the risk of misreported or misdiagnosed errors.

Using the IBM ID entered during activation, customers can view system and support information in the "My Systems" and "Premium Search" sections of the Electronic Support website at.

My Systems provides valuable reports of installed hardware and software using information collected from the systems by Electronic Service Agent. Using Premium Search and the Electronic Service Agent information that has been collected from your system, customers are able to see search results that apply specifically to their systems. For more information on how to utilize the power of IBM Electronic Services, contact your IBM Systems Services Representative, or visit.

An IBM part or feature installed during the initial installation of an IBM machine is subject to a full warranty effective on the date of installation of the machine. An IBM part or feature that replaces a previously installed part or feature assumes the remainder of the warranty period for the replaced part or feature.

An IBM part or feature added to a machine without replacing a previously installed part or feature is subject to a full warranty effective on its date of installation. Unless specified otherwise, the warranty period, type of warranty service, and service level of a part or feature are the same as those for the machine in which it is installed. If required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine.

IBM will attempt to resolve your problem over the telephone, or electronically via an IBM Web site. Certain Machines contain remote support capabilities for direct problem reporting, remote problem determination, and resolution with IBM.

You must follow the problem determination and resolution procedures that IBM specifies. Following problem determination, if IBM determines on-site service is required, scheduling of service will depend upon the time of your call, machine technology and redundancy, and availability of parts.

If applicable to your product, parts considered Customer Replaceable Units CRUs will be provided as part of the machine's standard warranty service. Service levels are response-time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country and location-specific information.

IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose.

Solved: You have taken a long position in a call option on IBM | uqyhadet.web.fc2.com

IBM is now shipping machines with selected non-IBM parts that contain an IBM field replaceable unit FRU part number label. These parts are to be serviced during the IBM machine warranty period. IBM is covering the service on these selected non-IBM parts as an accommodation to their customers, and normal warranty service procedures for the IBM machine apply. During the warranty period, warranty service upgrades provide an enhanced level of On-site Service for an additional charge. See the Warranty services section for additional details.

IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM Web site. If required, IBM provides repair or exchange service depending on the types of maintenance service specified for the machine.

IBM will attempt to resolve your problem over the telephone or electronically, via an IBM Web site. The specified level of maintenance service may not be available in all worldwide locations. The following service selections are available as maintenance options for your machine type.

Under certain conditions, IBM provides services for selected non-IBM parts at no additional charge for machines that are covered under warranty service upgrades or maintenance services. This service includes hardware problem determination PD on the non-IBM parts for example, adapter cards, PCMCIA cards, disk drives, memory installed within IBM machines and provides the labor to replace the failing parts at no additional charge. If IBM has a Technical Service Agreement with the manufacturer of the failing part, or if the failing part is an accommodations part a part with an IBM FRU labelIBM may also source and replace the failing part at no additional charge.

For all other non-IBM parts, customers are responsible for sourcing the parts. Installation labor is provided at no additional charge, if the machine is covered under a warranty service upgrade or a maintenance service.

When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order. Installation is performed by IBM.

IBM will install the machine in accordance with the IBM installation procedures for the machine. In the United States, contact IBM at IBM-SERV and in other countries contact the local IBM office. The Machine Installation Guide specifies site preparation, physical requirements and installation operating environment and any cabling included in the installation along with the approximate installation time in hours.

Customer requests for installation of items not covered in the installation guide may be performed at IBM's hourly service rate designated for the machine. IBM Machine Code is licensed for use by a customer on the IBM machine for which it was provided by IBM under the terms and conditions of the IBM License Agreement for Machine Code, to enable the machine to function in accordance with its specifications, and only for the capacity authorized by IBM and acquired by the customer.

You can obtain the agreement by contacting your IBM representative or visiting. Access to Machine Code updates is conditioned on entitlement and license validation in accordance with IBM policy and practice. IBM may verify entitlement through customer number, serial number, electronic restrictions, or any other means or methods employed by IBM in its discretion.

If the machine does not function as warranted and your problem can be resolved through your application of downloadable machine code, you are responsible for downloading and installing these designated Machine Code changes as IBM specifies.

If you would prefer, you may request IBM to install downloadable machine code changes; however, you may be charged for that service. No, the LIC license requires signed acceptance by the machine's end user directly with IBM, applicable to orders for a new machine, machine type conversion MES, and to machines transferred to another user.

A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance. Prices in the following PDF prices link are suggested list prices on day of announcement for the U. They are provided for your information only. Dealer prices may vary, and prices may also vary by country.

IBM list price does not include tax or shipping and is subject to change without notice. For ServiceElect ESA maintenance service charges, contact IBM Global Services at IBM IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions.

Offerings include financing for IT acquisition, including hardware, software, and services, from both IBM and other manufacturers or vendors. Offerings for all customer segments: Contact your local IBM Global Financing organization or visit. IBM Global Financing offerings are provided through IBM Credit LLC in the United States, and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers.

Rates are based on a customer's credit rating, financing terms, offering type, equipment type, and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice. IBM Global Financing offers competitive financing of hardware, software, and services, from both IBM and other manufacturers or vendors.

Financing Power Systems solutions from IBM Global Financing can help you acquire more from existing budgets while helping you conserve cash, and provide a comprehensive end-to-end multivendor IT financing solution. This end-to-end approach helps form the foundation of a cohesive technology management strategy that can be superior to ownership. IBM can help reduce costs compared to purchase, increase ROI, lower total cost of ownership, minimize risk, improve accountability, and enable you to focus on your core business strategies while giving you the ability to make flexible equipment decisions throughout the entire technology life cycle.

This could include financing for select facility design and construction, building and structural upgrades, infrastructure equipment, IT hardware, software, services, and consulting. Through our Global Asset Recovery Services' buyback program you can obtain cash for marketable IT assets and dispose of nonmarketable assets in a way that complies with environmental laws and regulations.

In addition for certain mid-range and high-end systems, customers leasing their Power Systems can upgrade to new technology at mid-lease for little or no change in their existing monthly payment. IBM offers options for clients to perform either in-place upgrades or side-by-side, nondisruptive migrations IBM Power Exchange to the latest POWER technology. For all customer segment offerings, rates, financing terms, offering type, equipment type, and options may vary by country.

To order, contact the Americas Call Centers or your local IBM representative, or your IBM Business Partner. To identify your local IBM representative or IBM Business Partner, call IBM-4YOU The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.

IBM, Power, AIX, PowerVM, Micro-Partitioning, PowerHA, POWER7, POWER, Cognos, Express, PartnerWorld, Global Technology Services and ibm.

Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only.

Additional terms of use are located at. For the most current information regarding IBM products, consult your IBM representative or reseller, or visit the IBM worldwide contacts page. IBM Power System E server, an IBM POWER8 technology-based system, addresses requirements of an industry-leading enterprise class system IBM United States Hardware Announcement October 6, ENUS Contact IBM Considering a purchase? Footer links Contact Privacy Terms of use Accessibility.

Reliability, Availability, and Serviceability. Statement of general direction.